MICROSCALE : REF : MSMI2 : Micro Sol - 28gr bottle (Decal Setting Solution)
Numéro d'article :
MSMI2
Fabricant
Microscale Decals.
---
Description :
La solution fixatrice Micro Sol est conçue pour les surfaces irrégulières les plus difficiles des maquettes. Elle assouplit complètement la décalcomanie Microscale, lui permettant d'épouser parfaitement les irrégularités de la surface sans la déformer. Des résultats exceptionnels, même dans des endroits apparemment impossibles, sont possibles car Micro Sol intègre la décalcomanie à la peinture. Pour cela, appliquez Micro Sol pendant quelques secondes seulement, puis laissez-le agir. Ne touchez pas la décalcomanie tant qu'elle n'est pas sèche, car elle est très fragile. Pour un résultat optimal, appliquez d'abord Micro Sol pour préparer la surface et améliorer l'adhérence. Assurez-vous que la surface est exempte de particules qui pourraient se glisser sous la décalcomanie et créer des imperfections. Ensuite, lorsque la surface est suffisamment sèche pour que la décalcomanie ne bouge plus, appliquez Micro Sol avec un petit pinceau plat. Appliquez-le en quelques passages seulement pour ne pas la déplacer. Laissez ensuite sécher la décalcomanie sans la toucher. Une seule application suffit dans la plupart des cas, mais, si nécessaire, une seconde application de Micro Sol peut s'avérer utile.
---
Description :
Micro Sol setting solution is for the most difficult irregular surfaces to be found on models. It completely softens the Microscale Decal, allowing it to drape down onto the surface of the model, conforming perfectly to surface irregularities without distortion. The most amazing results in seemingly impossible places are possible because Micro Sol actually makes the decal part of the painted surface. For that reason, you should coat Micro Sol on for only a few seconds and then leave it alone. It does the work. Do not touch until the decal has dried, as the decal is very soft at this stage and could be easily damaged. For the best results, first apply Micro Sol to prepare the surface and enhance the adhesive. Make sure the surface is free of particles that could get under the decal's film and cause a blemish. Then, when everything is dry enough that the decal will not move easily, apply Micro Sol with a small flat brush. Apply with as few strokes as possible so a not to disturb the decal. Then allow the decal to dry without disturbing it. One application is enough in most cases but, if necessary, a second application of Micro Sol can be helpful.